I wanted to discuss briefly the current price situation for old calculators in Europe. I don't know if this situation is temporary or it will just increase over time.
We all know that calculator prices have been increasing during the last 2-3 years. I just did not realized how much.
We do repairs for our customers, and for the HP41 family 90% of the repairs are quite easy and straightforward with our tools and parts. However, something that still requires an original part is when the screen is defective. It may be the LCD, or -more frequently- the display drivers. In these cases, the screen does not show anything or it shows the screen only when pressing a key. According to the service manuals, you need to change the screen then. Your otherwise perfect calculation cannot work unless you find another screen from a donor calculator. (apart from the difference between half-nut and full-nut calculators, the full-nut displays are largelly compatible with each other, save for a little capacitor if you're to use one of the very ealry screen with a later calculator processor)
So, we are always looking for calculators to act as donors. And for that purpose, it is better to find a defective calculator (if it were working well, why use it as donor? you just use it!!)
When I found a lot of 3 defective calculators in eBay Germany, I said "Perfect! I have most likely a couple of screens to repair and maybe other spares too). Be aware that these calculators had already been stripped of all port covers (which are the easiest and nices spare you can get from a defective calculator), so I said "OK - I can offer 150€ tops: two of them are C (for which I have already many processors) and there is only just one CV - for which the processor has a little market value. Then the interesting part are the screens! Let's assume (since these are sold as defective, never forget), that 2 of them are fine, the other really defective. I would be paying 150€ for 2 screens and a CV processor. One of the bodies is tall keys, also - that may have a slighllty higher value. I have plente of bodies without screen, so the body in itself has no value to me (unless it is tall keys, of course). So I bid 150€.
You have here below the results of the bid: 330€! This is crazy! This makes buying an old calculator in Europe (seems that the US is somewhat different and cheaper) totally crazy and you really need to repair your own calculator. The secopnd thing is that we need to say goodbye to calculators that have defective screens - it is just not economical to buy defective calcs for spares, at the price of roughly 100€ per screen (not counting the work of unsoldering and soldering back in the calculation that is being repaired). A pity!