|
N.º de producto: Battery holder 3D
|
Precio anterior 35,00 €
30,00 €
|
Caja de baterías para la familia HP41. Réplica mediante impresión 3D y con muelles en acero inoxidable 304
No hay existencias
|
¿Tiene alguna experiencia previa con este producto?
¡Nos interesa su opinión! Comparta su experiencia con otros clientes y evalúe este producto.
Información importante
Su opinión sólo se publicará aquí, y nos ayudará a mejorar la calidad de los artículos que ofrecemos.
No debe utilizar la función de opinión para publicar contenido de tipo comercial, político, pornográfico, obsceno, criminal, difamatorio o ilícito por algún otro motivo. La copia de opiniones que ya han sido publicadas en otros sitios está prohibida por ley. Nos reservamos el derecho a no publicar opiniones. Tiene derecho a revisar y corregir los datos que se han recopilado sobre usted, y a oponerse a que se procesen.
Tenga en cuenta nuestra información en
Política de privacidad.
* Campos obligatorios
Número de evaluaciones: 15
Evaluación media: 4,5
Like the original
de Jukka Levänen el 01/03/2023
Very handy. Now I can change the batteries with no worries about "memory lost". And it looks like the original and feels very robust.
Excellent replacement. Very well made.
de John el 14/08/2022
It is made with excellent quality and craftsmanship. I was very pleased when I received it.
Many thanks!
Excelente
de Anónimo el 13/02/2022
Encaja perfectamente y el color es exacto. Muy bueno como si fuera el original
Disappointing
de Klaus R. Tiefenbacher el 11/01/2022
I was disappointed when I received the battery compartment. I expected it to look like the original part on the outside. But you can tell at first glance that it was made with a 3D printer. The price for this is, in my opinion, overpriced. I cannot recommend this battery case and would not buy it again.
Muy bien fabricado
de Kurt el 06/06/2021
Cabe perfectamente en la caculadora.
Impressive quality.
de Mike el 27/02/2021
High quality, but expensive
de Raimund el 21/07/2020
Works very well. Fits in perfectly.
Excellent!
de thomas Dannenberg el 14/04/2020
nearly very good
de Manfred el 22/12/2019
I missed the "noses" that hold the battery holder in place. Glued in 2 carbon fiber rods with a diameter of 1mm, which protrude about 1mm. Now it works.
very good
de chris el 31/08/2019
Works and fits perfectly. The new springs are good and look nice. The only "negative" thing is that the surface does not match to the rest of the calculator. It's not bad but one can see the difference. But hey.... it's on the backside and I want to use the calc, not put it in a showcase :-)
5 stars
de Tom Y. el 05/07/2019
it fits! For my calculator that is 40 years old, I am glad that someone still takes the effort to create replacement parts.
Excellent
de Frank Petizian el 27/03/2019
I received the battery holder and it fit like a glove. What a joy it was to see the calculator turn on after over 15 years. I am very happy to have found The Calculator Store!
Excellent
de Anónimo el 11/01/2019
3D-printed replacement cover, done to a very high resolution and print quality. Perfect fit to 41C, worked first time when inserted into calculator. Recommended - I will be buying more.
Excellent
de Anónimo el 07/03/2018
Excellent!
de Michael Kizmann el 27/02/2018
Finally, the long sought-after replacement for battery holders. They have a tighter fit than the originals, but work perfectly. The batteries are held tight, so they don't fall out that easily which might also reduce pressure stress to the contacts. Very satisfied!
Todas las evaluaciones son publicadas por visitantes de la tienda o clientes de la tienda online reales y el operador se encarga de comprobrar su contenido mediante una inspección visual.
