Imprimir

Zebras for the HP41c

Publicado el por

Zebras for the HP41c

IMG_2838The HP41C full nut requires two zebra contacts betwen the keyboard circuit and the main processor. The original zebras seldon get destroyed, but in severe corrosion cases, the zebra connectors are also affected. Then you need to change them.

In HPmuseum.org there were several threads about alternatives for the zebras. We have done something else: we have custom-ordered a couple of zebra connectors that work for our application. The length, width and height are based on the originals. 

Now, the original is two round copper cylingers joined by a plastic membrane. As we don't have this membrane, we have designed a "zebra-holder" that keeps the zebra pair in place. It is made in 3D printed nylon (with a HP printer, of all brands!). It replaces the old structure, so that it can be round the zebras to keep them firmly in place. The old structure can be removed with pliers and a little force. Be careful to avoid breaking the screw posts.

If the screw posts are damaged, broken, or the screw rotates freely in them, the required piece is a different one, the lower post repair, which replaces both the zebra holder and the screw post, and that is glued in place.

 

Comentarios: 0
Más sobre: HP41c repair, zebra

Solo los usuarios registrados pueden poner comentarios.
Identificarse y añadir comentario Regístrese ahora