A new product for HP41c repair

Publicado el por

A new product for HP41c repair

We have now prepared a couple of new products designed to solve more HP41CL repair problems. We will discuss today the first one.

Our bent to do c to CL conversions has led us to specialize on full nut repair, instead of half nuts. But some of the tools and methods are also valuable for half nuts too!

The first of the new items we have created is the adaptor to replace screwed nuts in the original HP41C. You may have seen one of this: the processor circuit is secured to the main board with metal nuts around the lower screw posts. The problem with these: it is very easy to destroy the thread, since he read was formed by the action of the nut on the first attachment, nearly 40 years ago!

In the later units, the processor was secured in place by the pressure of the back side through two cylinders collated to the case. If you have one of the old cases, and you have broken the nut thread, you need to find a solution to push the circuit down against the zebra connectors. This is such solution. 

We have created a nylon piece that fits tightly around the lower screw posts, with a small bezel to ease the port entrance, and occasionally making a broken post able again. This piece translates the pressure from the back side of the calculator down to the circuit. Don't need to find the right height, or to adjust the angle: it will work - every time.

The piece has sides! As the back side has an angle compared with the circuit surface, we needed to create this angle to the piece. Therefore it can only be put one way.

As the color here really doesn't matter, we have created the price in the cheapest, clearest color from 3D printing: white.

I hope that is piece helps some of you fixing your beloved calculator!

Comentarios: 0
Más sobre: HP 41c, HP calculator repair

Solo los usuarios registrados pueden poner comentarios.
Identificarse y añadir comentario Regístrese ahora